Category: Journal

Occupational Stress Among a Cancer Hospital Nurses

Occupational Stress Among a Cancer Hospital Nurses
Kama Azida KAMARULZAMAN1, Syazwan Syah ZULKIFLY2, Nor Halim HASAN2

1 Department of Health Perak , 30000 Ipoh, Perak, Malaysia.

2 Department of Occupational Safety and Health Negeri Sembilan, 70000 Seremban, Negeri Sembilan, Malaysia

Page 12 – 20   |   Vol. 2 No. 3 (2017)  |    Available online on 1 December 2017

Full text

Abstract

Hospital nurses receive enormous amounts of physical and mental workload which causes them to develop work-related stress. In this research, a cross-sectional study was carried out to identify the level of perceived stress, and also to investigate the relationship between occupational stressor and perceived stress level among one hundred and eighty two (n=182) nurses in a cancer hospital. Data collection was done using a self-administered questionnaire consists Nursing Stress Scale (NSS) and Perceived Stress Scale (PSS). Based on the results obtained, majority of the nurses perceived high level of stress and six variables namely “workload”, “death and dying”, “inadequate preparation”, “lack of staff support”, “conflict with physician” and “conflict with other nurses” have relationship with occupational stress. The relationship between “uncertainty concerning treatment by physician” and “perceived stress” was found to be absent. NSS explained 19.7% of PSS and “inadequate preparation” as well as “conflict with physicians” the most influential factors towards perceived stress among nurses. For future research, this study is suggested to be expanded to a greater sample of nurses in other hospitals to obtain better conclusion and generalisation.

Keywords

NSS, PSS, Occupational Stress, Nurses

Acknowledgement

We would like to express our gratitude to lecturers from School of Business Management, Human Resource Department, Universiti Utara Malaysia for their guidance on conducting this research. Sincere gratitude also conveyed to all respondents who took part in this research and to all parties who are involved indirectly in assisting this research.

© 2022 Human Factors and Ergonomics Society (HFEM). All rights reserved.

Recommended articles

Publish with us

Human Factors & Ergonomics Journal (HFEJ), eISSN: 2590-3705  is the official Journal of Human Factors and Ergonomics Society Malaysia.  The journal is published on a biannual basis. HFEJ aims to address current research in the field of Ergonomics in addition to the broad coverage of cognitive ergonomics, user experience, physical ergonomics and others such as transportation, industrial design and industrial engineering. HFEJ is a member of, and subscribes to the principles of the COPE (Committee on Publication Ethics), as such we only accept original work.

The Estimation of Different Body Dimensions from Stature in Bangladeshi Male Population

The Estimation of Different Body Dimensions from Stature in Bangladeshi Male Population
Md. Asadujjaman1, Md Mashum Billal2, Md. Rasel Sarkar3, Md. Golam Rabbani4

1 Assistant Professor, Department of Industrial & Production Engineering, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh.

2 Lecturer, Department of Industrial & Production Engineering, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh.

3 Lecturer, Department of Industrial and Production Engineering, Bangladesh Army University of Science and Technology, Saidpur, Bangladesh.

4 Jr. Executive, Quality Control, United Surgical Ltd., Gazipur, Bangladesh.

Page 1 – 6   |   Vol. 2 No. 3 (2017)  |    Available online on 1 December 2017

Full text

Abstract

The prime concern of forensic anthropometry is to identify the individuals by analyzing the disintegrated human body parts. The aim of this study was to investigate the correlation between different human body measurements, and to estimate different body dimensions from stature. The study was carried out on 348 male volunteer participants; aged 19 to 25 years. Fourteen anthropometric parameters had been measured to conduct this study. After analyzing the data, it was found that there was a meaningful relation between the stature and other body dimensions (p< 0.001). Correlation coefficient (r) values of anthropometric data with stature were ranged from +0.22 to +0.83. The standard errors of estimation (SSE) values were varied from ±0.310 cm to ±3.899 cm. Regression equations derived in this paper can be used to estimate various body parts from stature for Bangladeshi male population. Finally, this study concluded that stature is a useful tool to estimate different human body dimensions. Consequently, this is such a novel study for the forensic department to identify persons in case of murders, accidents, natural disasters or war casualties.

Keywords

Forensic anthropometry, Body dimensions estimation, Stature

Acknowledgement

–

© 2022 Human Factors and Ergonomics Society (HFEM). All rights reserved.

Recommended articles

Publish with us

Human Factors & Ergonomics Journal (HFEJ), eISSN: 2590-3705  is the official Journal of Human Factors and Ergonomics Society Malaysia.  The journal is published on a biannual basis. HFEJ aims to address current research in the field of Ergonomics in addition to the broad coverage of cognitive ergonomics, user experience, physical ergonomics and others such as transportation, industrial design and industrial engineering. HFEJ is a member of, and subscribes to the principles of the COPE (Committee on Publication Ethics), as such we only accept original work.

Ergonomic Risk Analysis and Mental Workload Study Among Operators in Syringe Assembly Lines

Ergonomic Risk Analysis and Mental Workload Study Among Operators in Syringe Assembly Lines

Ummi Noor Nazahiah ABDULLAH, Norashiken OTHMAN, Atikah AWANG

School of Manufacturing Engineering, University Malaysia Perlis, Kampus Pauh Putra, 02600 Arau, Perlis.

Page 7 – 11   |   Vol. 2 No. 3 (2017)  |    Available online on 1 December 2017

Full text

Abstract

Inappropriate sitting working position among operators in syringe assembly inspection possibly contribute to the issue of several syringes passed the quality inspection and delivered to the clients even they contaminated with over amount of silicon lubricant. This inappropriate sitting posture in the inspection workstation could result the stress, fatigue, musculoskeletal disorder and mental workload issue among operators which influence the operators’ performance. This paper presents an investigation to identify the ergonomics and mental workload issues among the operators in the syringe assembly lines. A series of interview and observations were conducted using ergonomic risk analysis (ERA) checklist to investigate the ergonomics issues. NASA-Task Load Index (TLX) method also had been used as mental workload assessment tool. The results from this study show that there are issues in awkward postures, static and sustained work posture, repetition, lighting and noise. Besides, three out of four operators experience more than 50% score of workload during inspections with the high percentage of five index elements except one operator shows the different result. This study contributes to the study field by verifying the ergonomics and mental workload as significant factor to maintain the product quality and productivity. In future, advanced analysis will be conducted to investigate the identified issues in details and next propose the workstation design improvements.

Keywords

ERA,NASA-TLX, postural analysis, sitting position, syringe assembly

Acknowledgement

This study was supported by University Malaysia
Perlis (UniMAP) and University Putra Malaysia
(UPM). Thank you to the company that involved
in this study (the name is private and
confidential). Thank you also to the operators in
the syringe assembly lines that involve in this
investigation.

© 2022 Human Factors and Ergonomics Society (HFEM). All rights reserved.

Recommended articles

Publish with us

Human Factors & Ergonomics Journal (HFEJ), eISSN: 2590-3705  is the official Journal of Human Factors and Ergonomics Society Malaysia.  The journal is published on a biannual basis. HFEJ aims to address current research in the field of Ergonomics in addition to the broad coverage of cognitive ergonomics, user experience, physical ergonomics and others such as transportation, industrial design and industrial engineering. HFEJ is a member of, and subscribes to the principles of the COPE (Committee on Publication Ethics), as such we only accept original work.

Computer Mouse Usage Among Computer Gamers and its Association with Trigger Finger and Carpal Tunnel Syndrome

Computer Mouse Usage Among Computer Gamers and its Association with Trigger Finger and Carpal Tunnel Syndrome
Luqman APENDAI1, Ammar ADNAN1, Radin Zaid RADIN UMAR2, Siby SAMUEL3, Malek HAMID1, *

1 Department of Manufacturing and Materials Engineering, Faculty of Engineering, International Islamic University Malaysia, Selangor, Malaysia

2 Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka, Melaka, Malaysia

3 Department of Mechanical and Industrial Engineering, University of Massachusetts Amherst, MA, USA

* Corresponding Author: abdmalek@iium.edu.my

Page 45 – 47   |   Vol. 2, No. 2 (2017)   |    Available online on 1 September 2017

Full text

Abstract

Computer mouse design has evolved throughout generation. Most people are using computer mouse to do work and for entertainment. However, due to repetitive actions involving hand, it could lead to Trigger Finger and Carpal Tunnel syndromes. Objectives of the study are: (i) to evaluate the relationship between computer mouse’s usage during playing online games – number of keystroke, number of buttons clicking, distance of computer mouse dragging, and duration of active on game – and Trigger Finger syndrome via Trigger Finger test; and (ii) to evaluate the relationship between computer mouse’s usage during playing online games – number of keystroke, number of buttons clicking, distance of computer mouse dragging, and duration of active on game – and Carpal Tunnel syndrome via Phalen’s test. Thirty participants are recruited for the study. A participant are asked to download a software called ‘Mousotron’ on his computer system that provide data of his or her pattern of computer mouse usage – number of keystroke, number of buttons clicking, distance of computer mouse dragging, and duration of active on game. After that, participants are required to come to the laboratory for the assessment phase in which the Trigger Finger and Phalen’s tests are assessed. The interactions between the variables are analyzed and the results show a positive correlation for all interactions. The findings show how spending time playing video games will affect one’s health – specifically the hands.

Keywords

Trigger Finger test, Phalen’s test, computer mouse usage, mousotron

Acknowledgement

This study was also supported by the Department of Manufacturing and Materials Engineering, International Islamic University Malaysia, Malaysia.

© 2022 Human Factors and Ergonomics Society (HFEM). All rights reserved.

Recommended articles

Publish with us

Human Factors & Ergonomics Journal (HFEJ), eISSN: 2590-3705  is the official Journal of Human Factors and Ergonomics Society Malaysia.  The journal is published on a biannual basis. HFEJ aims to address current research in the field of Ergonomics in addition to the broad coverage of cognitive ergonomics, user experience, physical ergonomics and others such as transportation, industrial design and industrial engineering. HFEJ is a member of, and subscribes to the principles of the COPE (Committee on Publication Ethics), as such we only accept original work.

Malaysian Drivers’ Perception Towards Advanced Driver Assistance Systems (ADAS)

Malaysian Drivers’ Perception Towards Advanced Driver Assistance Systems (ADAS)

Muhammad Syafiq SYED MOHAMED

Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka (UTeM) , 76100 Durian Tunggal, Melaka, Malaysia.

Page 15 – 20   |   Vol. 2, No. 2 (2017)   |    Available online on 1 September 2017

Full text

Abstract

In the past few years many advanced driver assistance systems (ADAS) has made their way into common passenger cars. ADAS such as autonomous emergency braking (AEB), blind spot information system (BLIS), and many more has slowly made their way into passenger cars in Malaysia. Examples of cars in Malaysia equipped with some ADAS technology include the 2016 Mazda 3, Hyundai Ioniq Hybrid, and the recently introduced Honda CR-V. Even though ADAS has been around in passenger cars as early as late 1990’s, ADAS has only been widely introduced into passenger cars in the last few years. In this study, a content analysis of Malaysian automotive online portal was conducted to determine the overall perception of Malaysian drivers towards ADAS. As many as 277 comments related to ADAS were obtained from the Malaysian automotive online portal. Only 63 comments were related to the perception of ADAS. The comments were divided further into 27 positive comments and 36 negative comments. Due to the attitude of Malaysian drivers, as well as their driving style, ADAS technology was perceived to be more of a nuisance rather than of assistance. Two famous Malaysian driving habits, e.g. the cutting of lanes and tailgating were discussed together with the related ADAS (Lane Departure Warning, Adaptive Cruise Control and Autonomous Emergency Braking). Future implications of ADAS in Malaysia were also discussed.

Keywords

Advanced Driver Assistance Systems, ADAS, Malaysian drivers, perception

Acknowledgement

–

© 2022 Human Factors and Ergonomics Society (HFEM). All rights reserved.

Recommended articles

Publish with us

Human Factors & Ergonomics Journal (HFEJ), eISSN: 2590-3705  is the official Journal of Human Factors and Ergonomics Society Malaysia.  The journal is published on a biannual basis. HFEJ aims to address current research in the field of Ergonomics in addition to the broad coverage of cognitive ergonomics, user experience, physical ergonomics and others such as transportation, industrial design and industrial engineering. HFEJ is a member of, and subscribes to the principles of the COPE (Committee on Publication Ethics), as such we only accept original work.

The Ergonomics of Seat Design in Lecture Hall at Faculty of Medicine and Health Sciences (FMHS), Universiti Putra Malaysia (UPM)

The Ergonomics of Seat Design in Lecture Hall at Faculty of Medicine and Health Sciences (FMHS), Universiti Putra Malaysia (UPM)

Nur Aisyah binti ALIAS, Yee Guan NG, Shamsul Bahri Md TAMRIN

Department of Environmental and Occupational Health, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia.

Page 34 – 40   |   Vol. 2, No. 2 (2017)   |    Available online on 1 September 2017

Full text

Abstract

This is a cross-sectional study with the objective to determine the association between self-reported musculoskeletal symptoms (MSSs) and mismatch of the seats in lecture hall of Faculty of Medicine and Health Sciences (FMHS), Universiti Putra Malaysia (UPM). A total of 132 respondents (47 male and 85 female) whom were undergraduate students. Eight anthropometric and five furniture parameter dimensions were measured. Instruments used were questionnaire modified from Nordic Musculoskeletal Questionnaire, Martyn anthropometer set, measuring tape, height scale and weighing scale. Findings showed 51.5% mismatch of seat height, 5.3% mismatch of seat depth, 94.7% mismatch of desk height and 18.2% mismatch of upper edge of back rest. For the prevalence of MSSs in the past seven (7) days, 61.4% reported low back pain followed by neck pain (50%) and upper back pain (43.9%). There was significant difference between genders in anthropometric body measurement. Significant association were found between MSSs and mismatch. Based on the findings, it is recommended that in the event of long lecture hour, intermittent break should be allowed for students to stretch, move or better yet assume different posture such as standing or walking.

Keywords

Mismatch, seat design, anthropometry, MSDs

Acknowledgement

The author would like to express her gratitude to the respondents who were participated in this study including all staff and personnel in the Department of
Environmental and Occupational Health, Universiti Putra Malaysia.

© 2022 Human Factors and Ergonomics Society (HFEM). All rights reserved.

Recommended articles

Publish with us

Human Factors & Ergonomics Journal (HFEJ), eISSN: 2590-3705  is the official Journal of Human Factors and Ergonomics Society Malaysia.  The journal is published on a biannual basis. HFEJ aims to address current research in the field of Ergonomics in addition to the broad coverage of cognitive ergonomics, user experience, physical ergonomics and others such as transportation, industrial design and industrial engineering. HFEJ is a member of, and subscribes to the principles of the COPE (Committee on Publication Ethics), as such we only accept original work.

Digital Eye Strain Evaluation Among Video Gamers with and without Blue Light Monitor Filter

Digital Eye Strain Evaluation Among Video Gamers with and without Blue Light Monitor Filter
Nik Fakhri MANSOR1, Ammar ADNAN1, Radin Zaid RADIN UMAR2, Siby SAMUEL3, Malek HAMID1, *

1 Department of Manufacturing and Materials Engineering, Faculty of Engineering, International Islamic University Malaysia, Selangor, Malaysia

2 Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka, Melaka, Malaysia

3 Department of Mechanical and Industrial Engineering, University of Massachusetts Amherst, MA, USA

* Corresponding Author: abdmalek@iium.edu.my

Page 41 – 44   |   Vol. 2, No. 2 (2017)   |    Available online on 1 September 2017

Full text

Abstract

E-sports or electronic sports have been attracting a lot of attentions especially younger audience with the promise of wealth just through playing video games. Staring into monitor screen regardless of devices for an extended amount of time will lead to Digital Eye Strain (DES) in general, more particularly visual fatigue. The study is to explore the effect of extended exposure of blue light wave while playing video games to gamers, focusing on DOTA players. This study will investigate visual fatigue with and without blue light monitor filter. From a total of 20 participants who were recruited, 10 participants performed the experiment with blue light monitor filter and the remaining without blue light monitor filter. Visual fatigue was measured by the perceived frequency of light observed by each participant using critical flicker frequency (CFF) before and after the experiment. Participants were also required to perform subjective evaluation (SE) by answering questionnaire on visual fatigue symptoms that they experienced after the experiment. SE was used to establish correlation between the reading obtained from CFF to determine visual fatigue. The result shown that With_Filter and Without_Filter scored a positive and negative average difference in CFF score respectively. Teary eye was discovered to be the most common symptom in With_Filter and Without_Filter group although Without_Filter group experienced more symptoms than With_Filter group such as red eyes, twitching eyelids, blurred near and distant vision, and pain in and around eyes.

Keywords

Critical flicker frequency, eye strain, visual fatigue, blue light, monitor filter, DOTA

Acknowledgement

This study was also supported by the Department of Manufacturing and Materials Engineering, International Islamic University Malaysia, Malaysia.

© 2022 Human Factors and Ergonomics Society (HFEM). All rights reserved.

Recommended articles

Publish with us

Human Factors & Ergonomics Journal (HFEJ), eISSN: 2590-3705  is the official Journal of Human Factors and Ergonomics Society Malaysia.  The journal is published on a biannual basis. HFEJ aims to address current research in the field of Ergonomics in addition to the broad coverage of cognitive ergonomics, user experience, physical ergonomics and others such as transportation, industrial design and industrial engineering. HFEJ is a member of, and subscribes to the principles of the COPE (Committee on Publication Ethics), as such we only accept original work.

Potential of Participatory Ergonomic Intervention Approaches to Reduce Work-Related Musculoskeletal Disorders Among Office Workers: A Review

Potential of Participatory Ergonomic Intervention Approaches to Reduce Work-Related Musculoskeletal Disorders Among Office Workers: A Review
Ayman ALBEELI1, Shamsul Bahri Mohd TAMRIN1, Ng Yee GUAN1, Karmegam KARUPPIAH1

1 Department of Environmental and Occupational Health, Faculty of Medicine and Health Sciences, University Putra Malaysia.

Page 1 – 14   |   Vol. 2, No. 2 (2017)   |    Available online on 1 September 2017

Full text

Abstract

Musculoskeletal disorders (MSDs) are a prevalent issue affecting office workers worldwide and resulting in economic losses and health problems. Pursuing of suitable ergonomic interventions approaches became an inescapable need in order of overcoming the future forecast that expects increased proportion of office-based worker as result of rapid growth of information technology. Participatory ergonomic intervention approaches emerge as a promising ergonomic intervention method to lower the work-related musculoskeletal disorders among office workers. This review underlines the ergonomic intervention methods that have been tried or tested for work-related musculoskeletal disorders reduction in office settings. The current status of using participatory ergonomic intervention approaches has shown potential effectiveness in reducing the prevalence of work-related MSDs. The future perspectives (strengths and opportunities) of these participatory ergonomic intervention approaches includes cost effectiveness, needed materials are simple and effortlessly acquired, and of low-cost. But then, the knowledge gaps (threats and weaknesses) regarding these participatory approaches comprise the lack of quality evaluation studies. Using participatory ergonomic intervention approaches is an imperative component that might help in reducing the prevalence of WMSDs among office-workers in both developed and developing countries and being reliable methods than other sophisticated or high-cost ergonomic intervention methods.

Keywords

Participatory intervention, ergonomic, office-workers, musculoskeletal disorders

Acknowledgement

–

© 2022 Human Factors and Ergonomics Society (HFEM). All rights reserved.

Recommended articles

Publish with us

Human Factors & Ergonomics Journal (HFEJ), eISSN: 2590-3705  is the official Journal of Human Factors and Ergonomics Society Malaysia.  The journal is published on a biannual basis. HFEJ aims to address current research in the field of Ergonomics in addition to the broad coverage of cognitive ergonomics, user experience, physical ergonomics and others such as transportation, industrial design and industrial engineering. HFEJ is a member of, and subscribes to the principles of the COPE (Committee on Publication Ethics), as such we only accept original work.

Dual Audio: Effects of Volume Range on Dichotic Listening Via Spatially Separated Speakers

Dual Audio: Effects of Volume Range on Dichotic Listening Via Spatially Separated Speakers
Steven J. KERR1, Carmen SIAU1

1 Motorola Solutions, Human Factors Research, Penang, Malaysia.

Page 21 – 33   |   Vol. 2, No. 2 (2017)   |    Available online on 1 September 2017

Full text

Abstract

Professionals who utilize communication devices may have to listen and monitor multiple audio streams whether from different Land Mobile Radio (LMR) or public broadband (LTE) channels whilst carrying out their day to day tasks. Understanding how humans cope with multiple audio streams is therefore important to help engineers design solutions that will allow professionals to both hear and understand vital information from numerous sources. This paper describes a usability study of a spatialized dual speaker system (one speaker on each shoulder) whereby 16 participants from age 23 to 54 had to listen to 2 audio streams played simultaneously, a primary audio stream on one speaker to be concentrated on to understand content and a secondary stream played on the other speaker to be scanned for keywords. Participants were asked true or false questions on the primary stream to gauge level of information understood whilst being scored on their ability to recognize when selected keywords were spoken in the secondary stream. These audio streams were played at different volume ranges and deltas to understand if differences in volumes across a range of volumes can assist users in this task. The results has shown that there does not appear to be a specific volume range or delta that assists users in listening to content from 2 spatialized audio sources and that individual capabilities are more likely to be an important factor. Devices that have capability of broadcasting multiple channels therefore need the ability for each channel’s volume to be controlled individually and not be auto changed, as each user will have their own personal preferences.

Keywords

Dichotic Listening, Multi-Stream Audio, Divided Attention

Acknowledgement

Thanks to the participants and engineers from Motorola Solutions Penang in assisting with this study.

© 2022 Human Factors and Ergonomics Society (HFEM). All rights reserved.

Recommended articles

Publish with us

Human Factors & Ergonomics Journal (HFEJ), eISSN: 2590-3705  is the official Journal of Human Factors and Ergonomics Society Malaysia.  The journal is published on a biannual basis. HFEJ aims to address current research in the field of Ergonomics in addition to the broad coverage of cognitive ergonomics, user experience, physical ergonomics and others such as transportation, industrial design and industrial engineering. HFEJ is a member of, and subscribes to the principles of the COPE (Committee on Publication Ethics), as such we only accept original work.

Assessing Exposure to Physical Risk Factors for Work-Related Musculoskeletal Disorders and Relevant Psychosocial Factors Among Assembly Workers in an Automotive Component Assembly Plant

Assessing Exposure to Physical Risk Factors for Work-Related Musculoskeletal Disorders and Relevant Psychosocial Factors Among Assembly Workers in an Automotive Component Assembly Plant
FAZILAH ABDUL AZIZ1, ZAKRI GHAZALLI1, NIK MOHD ZUKI MOHAMED1, and AMRI ISFAR2

1 Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia

2 Safety, Health and Environment Department, Ingress Technologies Malaysia SDN BHD, 48300 Rawang, Selangor, Malaysia

Page 34 – 51   |   Vol. 2, No. 1 (2017)   |    Available online on 1 April 2017

Full text

Abstract

Work-related musculoskeletal disorders (WMSDs) are a common health problem throughout the manufacturing industry. Determination of musculoskeletal disorders and its relevant factors are one the most leading basis for ergonomics intervention programs in the automotive industry. This study was aimed to identify the ergonomics physical and psychosocial risk factors in automotive component assembly plant workers. In total ten workers with different job tasks were observed using Quick Exposure Check (QEC) which is an observational instrument, which allows practitioners and workers to assess four key regions of the body. It was found that automotive assembly component assembly plant workers were exposed to many postural problems while performing automotive component assembly task activities. Results of the QEC scores were found to be very high for the worker’s neck, whereas the scores for the worker’s back (in moving) and worker’s shoulder/arm were found to be high. The workers in spot gun welding process in two workstations including panel member rear cross No.1 spot gun welding assembly process (Line 2) as well as workers at the panel roof side inner spot gun welding assembly process suffered from very high levels of WMSDs at all worker’s main body regions except wrist/hand. Meanwhile, the vibration exposure level is high in most of the workstations. In addition, a very high exposure level for stress has been found in the panel member rear cross No.1 spot gun welding assembly process (Line 2) workstation. Musculoskeletal disorders had a high prevalence among workers in this automotive component assembly plant. The physical and psychosocial risk factors were required to be identified and controlled so that the WMSD’s symptoms can be minimized. The results of this study will be applied to a knowledge-based ergonomics risk assessment system development for assembly plant workers in an automotive component manufacturer.

Keywords

Work-related musculoskeletal disorders (WMSDs), musculoskeletal disorders automotive component assembly plant, manual assembly process, and manual welding assembly process

Acknowledgement

The authors also would like to acknowledge University Malaysia Pahang (UMP), the
Ministry of Higher Education Malaysia (MoHE) of the scholarship SLAI (Sijil Latihan
Akademik IPTA) and Ingress Technologies Sdn Bhd.

© 2022 Human Factors and Ergonomics Society (HFEM). All rights reserved.

Recommended articles

Publish with us

Human Factors & Ergonomics Journal (HFEJ), eISSN: 2590-3705  is the official Journal of Human Factors and Ergonomics Society Malaysia.  The journal is published on a biannual basis. HFEJ aims to address current research in the field of Ergonomics in addition to the broad coverage of cognitive ergonomics, user experience, physical ergonomics and others such as transportation, industrial design and industrial engineering. HFEJ is a member of, and subscribes to the principles of the COPE (Committee on Publication Ethics), as such we only accept original work.